Replacing the center trunk panel, 1969 Chevrolet Camaro - Part 3
In the previous post we welded in the trunk floor panel, But we are not done, now we need to weld in the fuel tank braces.
First we need to prepare the floor trunk panel, we start by marking where the braces will be welded and remove the primer where we will be welding.
Then we apply a weld thru primer
Now we are ready to weld, check out the result.
Check out this short video.
Visit the Project Page 1969 Chevrolet Camaro Restoration Project for more.
Stay tuned for more progress on this project, subscribe to the blog