- Sylvain Raymond
Replacing the center trunk panel, 1969 Chevrolet Camaro - Part 2
Updated: Jun 10, 2019
In the Part 1 blog we cut out the rusted out trunk floor, now it's time to weld in the new panel.
First we need to prep the panel by drilling holes all along the edge where the panel will overlap to be able to weld it.

Watch this short video, to see more detail
First we make sure it is positioned properly with a few self tap screws before we start welding. Sorry no pictures.
Now that it's welded in we cleaned up the welds, this is what it looks like.
Watch this short video, to see more detail
Visit the Project Page 1969 Chevrolet Camaro Restoration Project for more.
Stay tuned for more progress on this project
158 views0 comments